After a patient was admitted with a complex fracture, the Craniomaxillofacial Surgery unit at Galilee Medical Center in Nahariya, Israel, headed by Prof. Samer Saruji, initiated a surgical planning workflow using 3D Systems’ surgical planning software.
The 22 year-old female suffered from a left orbital fracture after falling from the second floor, and it was decided to create an implant in order to reconstruct the missing part in her left orbit.
“Due to the complexity of the fracture and its delicate location, one of the challenges the team faced was to achieve optimal fitting of the implant to the patient’s anatomy while preserving its functionality and highest aesthetic results,” said Dr. Lior Tzadok, senior craniomaxillofacial surgeon, Galilee Medical Center.
Craniomaxillofacial surgeons perform major structural surgeries that involve bones and soft tissues (skin and muscle) in the head and neck area. The complex anatomy of the craniofacial skeleton presents a challenge when attempting to achieve the ideal aesthetic and functional outcomes.
“Using D2P software, we were able to segment the replicate structures out of the patient’s CT scan and send it for printing in our 3D lab (CJP 460 printer, 3D Systems). The printed gypsum model allowed us to better understand the patient’s pathology. Using FreeForm 3D systems’ design software, we mirrored the healthy side, shaped the implant and sent the implant file to 3D Systems’ FDA and CE registered facility in Leuven, Belgium, and received a Patient Specific platinum Implant (PSI),” said Dr. Adib Zoabi, craniomaxillofacial fellow, Galilee Medical Center.
“The ability to use a few products from the same company helped us achieve a faster and smoother process to the end result, without wasting time between the workflow steps,” said Dr. Zoabi.
In addition to surgical planning, the physicians used the printed gypsum model to verify the titanium implant fitting and explained to the patient and family the severity of the problem and outlined the surgery plan and the expected result.
“Since the technology enables us to accurately predict and reach the result as we planned, it is now easier for us to share the surgical plan with the patient and his family,” said Dr. Tzadok.
This has also a positive effect on the patient’s understanding and trust. “The physician showed me the printed model of my healthy and fractured orbit. I didn’t realize the magnitude of the problem until I saw the fracture size. I could not understand it by looking at the CT,” said the patient. “After the physician’s explanation about the procedure and seeing the implant, I felt more confident to have the surgery.”
Reconstructive surgery has historically relied on the surgeon’s subjective assessment of form and aesthetics preoperatively and intraoperatively, with intraoperative decision-making based on visual anatomical inspection, after bending the metal plate implant. Although good outcomes can and are often achieved, the highly subjective nature of this process results in variable surgeon-specific outcomes and can also lead to prolonged surgical time.
“The surgery was smooth and quick, and the result was beyond our expectations,” said Dr. Tzadok. “The most amazing reaction to the planning was received in the OR. In this surgery, immediately when we put the printed plate in place according to planning, we were all looking and it was obvious that we have the correct positioning. The eyeballs were exactly where we planned. For surgeons, it brings something we didn’t have before, knowing the magnitude of the problem, being able to copy from the healthy side to the pathological side, and to predict the outcome. This minimizes the risk of error, shortens the operation time and helps us know what will be the final product and ‘promise it’ to our patients.”
The shortened procedure time and the excellent surgical result effect on the patient was obvious. “The operation was quick and almost painless, except for a slight pain in one eye. I was released two days later. There was no scar and no one knows I had an eye operation, which is amazing. After three days, I was at home reading books,” said the patient.
Galilee Medical established a 3D printing lab in the craniomaxillofacial unit. This is the first and currently the only center in Israel that incorporated in-house end-to-end surgical planning workflow, in which physicians have the know-how for using 3D Systems’ surgical planning applications and 3D printing.
“We are speaking in new terms in the surgical world that are different from everything we used to know. More and more ‘dry runs’ are performed before the actual surgery. The surgeon is becoming a designer,” said Prof. Saruji. “We have just started to use this workflow in our daily practice and we already see the great progress in our patient outcome. The errors are dramatically reduced and the surgical ability of the surgeon is constantly improving. In addition, having those capabilities in-house helps us to reduce procedural cost. Our success here leads to a growing interest in the hospital to expand the 3D Lab usage to other departments, such as neurosurgery. We hope to see this trend improving patient outcomes in more and more areas,” said Prof. Saruji.